Steps to make telnet in Windows/Linux/MAC

You can make a Telnet by following the below mentioned steps:

===============

Open a command prompt in Windows:

1. Click Start > Run.

2. Type cmd.

3. Click OK. 

Note: To exit from the command prompt, type exit and press Enter.

In the command prompt window type:

telnet <domainname> <Port No> 

Press Enter.

Note: To exit out of the Telnet application type Ctrl + ], then type quit.

===============

Opening a command or shell prompt in Linux:

The exact method of doing this varies with the distribution and version of Linux operating system in use. 

If you are looking at a graphical screen, the most common method of getting to a shell prompt is to press Ctrl + Alt + F2. You may have to log in.

Note: To logout, type exit and press Enter. To return to the graphical interface, press Alt + F7.

Opening a command or shell prompt in Mac OS:

1. Click Finder.

2. Open the /Applications/Utilities folder by pressing Command + Shift + U.

3. Open the Terminal application.

Note: To exit from Terminal, type exit, press Enter then press Command + Q.

In the terminal, you can type the same command as typed in windows.

===============